0 ₽
Checkout
Hit
Ball valve 1/2 "is one of the modern types of shut-off valves with high and reliable tightness. The design of these ball valves provides a dense overlap of the passage while practically making no effort to control it. Due to the simple shape of ..
220 ₽
Add to Cart
Hit
Ball valve L-shaped НР 1/2" is one of the modern types of shut-off valves with high and reliable tightness. The design of these ball valves ensures tight shut-off of the passage with practically no effort to control it. Due to the simple shape of the..
240 ₽
Add to Cart
Hit
The crane for fermentation tanks is a very convenient small drain valve for a 17 mm hole, installed in the tank wall using a reliable threaded connection. Due to the presence of 2 silicone gaskets and the material of manufacture, it can hermetically ..
160 ₽
NOTIFY
Hit
The crane for fermentation tanks is a very convenient small drain valve for a 17 mm hole, installed in the tank wall using a reliable threaded connection. Due to the presence of 2 silicone gaskets and the material of manufacture, it can hermetically ..
50 ₽
Add to Cart
Hit
Rotary plastic tap, very convenient for pouring beer from a fermentation tank. It eliminates the infection of beer in samples for density and overflow. The crane is installed on a fermentation tank or barrel. Easy to install: with two gaskets and a n..
130 ₽
Add to Cart
Hit
The crane for fermentation tanks is a very convenient small drain valve for a 12 mm hole, installed in the tank wall using a reliable threaded connection. Due to the presence of 2 silicone gaskets and the material of manufacture, it can hermetically ..
50 ₽
Add to Cart
Hit
10mm needle valve (STAINLESS STEEL) with a collet clamp with a valve is required to fine-tune the water supply to the reflux condenser or refrigerator. It is used to connect two hoses of the same diameter, to regulate the water supply and is suitable..
660 ₽
Add to Cart
Hit
8 mm needle valve (STAINLESS STEEL) with a collet clamp with a valve is required to fine-tune the water supply to the reflux condenser or refrigerator. It is used to connect two hoses of the same diameter, to regulate the water supply and is suitable..
630 ₽
Add to Cart
Hit
10 mm needle valve (Brass) with a collet clamp with a valve is required to fine-tune the water supply to the reflux condenser or refrigerator. It is used to connect two hoses of the same diameter, to regulate the water supply and is suitable for inst..
200 ₽
Add to Cart
Hit
8 mm needle valve (Brass) with a collet clamp with a valve is required to fine-tune the water supply to the reflux condenser or refrigerator. It is used to connect two hoses of the same diameter, to regulate the water supply and is suitable for insta..
185 ₽
Add to Cart
Hit
Stainless steel tube 6 mm for needle tap. It is used to install a needle valve in the collet mount and then connect it to a hose to control the water supply and is suitable for installation on sampling units, distillation and mash columns.
Tube leng..
50 ₽
Add to Cart
Hit
A 10 mm quick-release needle valve with push-type collet clamp is needed to fine-tune the flow of water to a reflux condenser or refrigerator. It is used to connect two tubes of the same diameter, to connect hoses to them and control the water supply..
190 ₽
Add to Cart
Hit
Stainless steel tube 8 mm for needle tap. It is used to install a needle valve in the collet mount and then connect it to a hose to control the water supply and is suitable for installation on sampling units, distillation and mash columns.
Tube leng..
50 ₽
Add to Cart
Hit
A 12 mm quick-release needle valve with push-type collet clamp is needed to fine-tune the flow of water to a reflux condenser or refrigerator. It is used to connect two tubes of the same diameter, to connect hoses to them and control the water supply..
280 ₽
Add to Cart
Hit
Stainless steel tube 10 mm for needle tap. It is used to install a needle valve in the collet mount and then connect it to a hose to control the water supply and is suitable for installation on sampling units, distillation and mash columns.
Tube len..
50 ₽
Add to Cart
Hit
The wooden crane is easy to use: it does not need to be pierced into the barrel, it's enough to simply insert it into the hole, while the tightness is achieved by swelling the tree. In the manufacture of the valve, completely safe materials are u..
420 ₽
NOTIFY
