The apparatus for producing hydrolyte with a large steam tank в Челябинске

1. Unpack the device to get a hydrolate and remove all packaging materials.
2. Remove traces of factory treatment with water and detergent and rinse with clean water.
3. Fill the distillation cube with a small amount of clean water, assemble the apparatus, and without connecting the water supply hoses, boil the water for 30 minutes. To disassemble the device, drain the remainder of the water from the distillation cube.
4. The volume of water should not exceed 3/4 of the volume of the distillation cube.
5. Water is poured through the neck into the distillation cube.
6. Put vegetable raw materials (various herbs, flowers, fruits or roots of plants) in a folding dry cell, no more than 2/3 of the volume of the dismountable dry-cell.
7. After connecting the cooling hoses to the chiller fittings, check for tightness of their connection by briefly submitting water to the hoses.
8. The assembled apparatus for obtaining the hydrolate is put on a heat source and set the heating power to the maximum value (in order to shorten the heating time of the distillation cube).
9. After reaching a temperature reading of 80°C on the thermometer, turn on the water supply for cooling. Strongly not necessary, enough laminar flow of water (without air bubbles).
10. When the values on the thermometer are 97-100 ° C (the scatter of the thermometer is due to the measurement error), the water in the distillation cube will evaporate and the water vapor will begin to pass through the dismountable dry-cell, being saturated with biological elements contained in the plant raw materials.
11. In process of "washing away" of biological elements from vegetative raw materials their concentration in the received distillate will start to decrease. The degree of concentration of biological elements in the hydrolate is selected individually, based on specific requirements.
12. Watch the thermometer on the distillation cube. If the reading exceeds 110°C, turn off the heating source and wait for the unit to cool down, disassemble it to perform a revision to find clogging.
13. For safety reasons, do not allow complete boiling-out of the water in the distillation cube. Control the amount of water remaining in the distillation cube by the volume of the hydrolyte obtained - they are approximately the same.

Connection diagram

Delivery of Gorilych products and related products.

You can buy any stills, brewing and distillation column "Gorilych" in our Internet-shop ChZDA and get your order in Chelyabinsk or in official representative offices in different Russian cities. The list of stores or points of delivery (PWZ) in the Chelyabinsk region is constantly expanding and the actual information on their addresses and office hours you can always find on the interactive map when ordering, or get the information you need from our consultants free by phone 8 (800) 775-90-83.

You choose your own delivery variant.

You can choose a convenient way of delivery of your stills "Gorilych" and other CHZDA products to Chelyabinsk. When ordering, specify the type of delivery and select any delivery point (PWZ) in the list or on the interactive map. We will take care of the rest.

Safe and cautious packing

Before shipping your order each kit of Gorilych stills is carefully inspected for any external defects, wrapped in bubble wrap, carefully and tightly packed in shipping carton and provided with all the necessary documents (bill of lading, passport, warranty card). During the whole process of delivery to Chelyabinsk region we always track the location of your order to notify the buyer on the arrival of the goods to receive them.

Up-to-date information on the location of the order

Due to advanced integration solutions in Chelyabinsk ZDA online store the buyer is always aware of where and at what stage his order is.

Online information in the personal cabinet about the order's progress at all stages;

convenient services on site to track the progress of the order;

Post and SMS-notification of changes in order status and readiness of goods for delivery;

Agreeing on a convenient time of delivery with the courier service.

Look first, pay later

Due to our courier service and long-term cooperation with reliable transportation companies, the customer in most cases (excluding Russian Post) can always open the package upon receipt of the order and make sure that the package is intact and the order is complete. And only if there are no comments, the buyer can pay for the received goods in the store, at the point of delivery or to the courier.

ChZDA store not only offers quality stills and distillers of its own production in Chelyabinsk region, but also the most comfortable, and most importantly, favorable conditions for the purchase in Chelyabinsk. You do not need to solve the question of payment when ordering products from our catalog because you can pay for the stillizer in any convenient way including:

Bank cards MIR, Visa, Mastercard, Maestro;

Payment through a bank branch;

Through a system of electronic money UMoneu;

Payment to the courier at delivery of the order;

Payment at the issuing point;

Payment by cash on delivery at the post office;

We also have unique ways of payment - by accumulated bonuses and a gift certificate. Take part in our promotional actions, accumulate bonus points and get our products with great discount.

 Absolute protection for online payments

All payments for CHZDA goods are made online through secure service JuMoneu, so you can be sure that all information with payment data is guaranteed to remain confidential and secure and can not be used by unauthorized persons: payment service JuMoneu is protected by PCI DSS - a standard Visa and Mastercard. Payments are credited on the same day.

 We wish you successful purchases!